Marine Ballast Water Treatment System >> Membrane Separator Treatment >> Micro-Membrane Ballast Water Treatment System
Micro-Membrane Ballast Water Treatment System
Product Name Ballast Water Treatment System
Treatment Process Filter+Micro-Membrane Separator+Nitrogen Generator
Main Features
1.No need of changing filter core for self-cleaning filter
2.Membrane separator can remove all the microbes
3.No need for chemicals storage to avoid secondary pollution
4.Low power consumption,small footprint
5.No corrosion on ballast water bulkhead
Component Introduction
1.Self-Cleaning Filter
Outside of sea water is sucked by ballast water pump from through sea valve and cribble filter.At first,it enters 50渭m stainless steel self-cleaning filter ti remove particles and a majorityof microbes in water and then the deposed liquid which contains concentrated microbes discharges to domestic ports. The suction organ will automatically rotate when the pressure difference increases or after the set time,take turns sequence to suck inserted things of each filter core.
2.Mirco-Membrane Separator
Menbrane technology has been developed quite a lot during the last decade and membrane applicationbecomes the landmark to verdict the water Treatment process is advances or not.Membrane can not only stop plankton of 10渭m-50渭m but also remove bacteria.Back-flushing organ will back-flush the membrane at regular time,so as to extend membrane lifetime.
3.Nitrogen-Generator
Nitrogen making plant has already been generally applied in preventing explosion system in oil storage of oil tanker.American regulation recommends to use inert gases for protecting ballast water tank from corrosion.The equipment adopted by NiBallast applies molecule screen PSA to separate nitrogen from air. The highest concentration of nitrogen can reach 99.99% and is the lowest power consumption.Take 200m鲁/h ballast water system for example,the power consumption is only 2.2kw which is the lowest of all ballast water Treatment system

Click here to contact me!