Marine Welding Materials >> Welding Electrode >> Stainless Steel Electrode >> E316-15Stainless Steel Electrode AWS E316-15
 |
||||||||||
| Product Name | Stainless Steel Electrode | |||||||||
| Product No. | MHAE411-WE058 | |||||||||
| Standard | ||||||||||
| GB | E316-15 | |||||||||
| AWS | E316-15 | |||||||||
| DIN | E19123B20+ | |||||||||
| Type of Covering | Low hydrogen Sodium | |||||||||
| Welding Position | F,V,OH,H | |||||||||
| Chemical Composition | C | Mn | Si | S | P | Cr | Ni | Mo | V | Cu |
| Guarantee | 0.051 | 1.22 | 0.49 | 0.008 | 0.022 | 18.78 | 12.2 | 2.40 | 0.14 | — |
| Mechanical Properties of Deposited Metal | ||||||||||
| Test Item | Tensile Strengh Rm (MPa) | Yield Point ReL (MPa) | Elongation A4 (%) | Akv1(J) | ||||||
| Guarantee | 575 | 43 | ||||||||
| Reference Current (DC) | ||||||||||
| Electrode Diameter(mm) | 2.0 | 2.5 | 3.2 | 4.0 | 5.0 | |||||
| Welding Current(A) | 25-50 | 50-80 | 80-110 | 110-160 | 160-200 | |||||
| Instructions | ||||||||||
| 1.The Electrodes must be baked under 250℃ for an hour before Welding. | ||||||||||
| 2.Use dc reverse connect as far as possible,for using AC welding ,the penetration is shallow.In order to avoid the welding electrode aglow,electric current should not be oversized. | ||||||||||
| Application | ||||||||||
| Suitable for 06Cr17Ni12Mo2 & Cr18Ni12Mo2 stainless steel structures for organic acid or inorganic acid mediums. Also it could be used in high Cr steel or dissimilar steels that cannot be PWHT. | ||||||||||
