Marine Welding Materials >> Welding Wire >> Flux cored Wire >> E80T5-B2CFlux Cored Wire AWS E80T5-B2C
 |
||||||||||
| Product Name | Flux cored Wire | |||||||||
| Product No. | MHAE421-WW016 | |||||||||
| Standard | ||||||||||
| GB | GB/T 17493-1998 | |||||||||
| AWS | AWS A5.29 E80T5-B2C | |||||||||
| Welding Wire Type | Alkali Heat Resistant Steel Flux-Cored Wires | |||||||||
| Welding Position | F,HF,V | |||||||||
| Chemical Composition | C | Mn | Si | S | P | Cr | Ni | Mo | Cu | V |
| Typical | 0.06 | 0.8 | 0.3 | 0.01 | 0.012 | 1.15 | 0.45 | |||
| Mechanical Properties of Deposited Metal | ||||||||||
| Test Item | Yield Point ReL (MPa) | Tensile Strength Rm (MPa) | Elongation A 4(%) | Akv1(J)Tem | Shield Gas | |||||
| Temp. (℃) | Joule | |||||||||
| Typical | 510 | 600 | 24 | 25 | 180 | CO2 | ||||
| Application | ||||||||||
| It is suitable for flat,horizontal filler or vertical up welding on which angle below 45°,higher tensile strength,better crack-resisting structures that fabricated by 550MPa grade heat resistant low alloy steels,which work temperature lower than 520℃.Welded piece should be preheated to 150-300℃ before welding. | ||||||||||
